Monel K-500 Forged Flanges

Clicks:

Jiangyin Jiangnan is one leading producer of Monel K-500 forged flanges from china.
As per the size of Monel K-500 Forging flanges, the Maximum diameter that we could do is 1200mm, and the maximum length that we could do is 1000mm, The maximum weight that we could do is 30 tons
Following is the type of Monel K-500 forged flange that we could do
Monel K-500 forged Blind Flanges,Monel K-500 forged Lap Joint Flanges,Monel K-500 forged Slip-on Flanges,Monel K-500 forged Orifice Flanges,Monel K-500 forged Weld Neck Flanges,Monel K-500 forged Socket Weld Flanges,Monel K-500 forged Anchor Flanges,Monel K-500 forged LWN-flanges, Monel K-500 forged Girth flanges,Monel K-500 forged Swivel flanges
The diameter of Monel K-500 forged flanges that we could do is 1/2” -96”, DN15-DN2000
The pressure of Monel K-500 forged flange that we could do is 150# - 2500# (PN6 – PN40)
The melting method of Monel K-500 ignot is ESR+VIR or VIM+ESR+VAR
As per forging of Monel K-500 flanges, we have 1 tons,3 tons,6 tons,9 tons open die forging parts hammer and 4500 tons hydraulic press,35 tons of manipulators, maximum load of 100 tons heating furnaces, maximum load of 100 tons heat treatment furnaces�?750x2000 mm max sawing machines
We could do solution treatment and ageing treatment for Monel K-500 forging flanges as per the clients
The chemical compostion of monel K-500 forged flanges is as follows

	C	Si	Mn	P	S	Ni	Mo	Cu	Ti	Al	Fe
Min						63		27	0.35	2.3
Max	0.18	0.50	1.50		0.010			33	0.85	3.15	balance

The mechenical property of Monel K-500 forged flanges is as follows:

Tensile Strength	Min 135KSI	Min 931MPA
Yield Strength	Min 95KSI	Min 655MPA
Elongation	Min 20%
Reduction	Min35%

We could do rough or final machined of Monel K-500 forged flange as per the drawing of the clients

Monel K-500 has Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidising mineral acids, salts and alkalis

We have Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester to inspect monel K-500 forged flanges

Monel K-500 forged flanges have wide use in many industries, such as
Monel K-500 forged flanges that are used in Chlorinated solvents,Crude oil distillation towers,Feed water and steam generator tubing.,Brine heaters
Monel K-500 forged flange that are used in heat exchangers and pressure vessels.
Monel K-500 forged flange that are used in Stripper columns, separators, columns, hydro treaters, hydro crackers, desalters.
Monel K-500 forged flanges that are used in ea water scrubbers in tanker inert gas systems.,Sulfuric acid and hydrofluoric acid alkylation plants
Monel K-500 forging flanges that are used in marine atmospheres and tidal waters resistance to chloride-containing environments,Crude petroleum stills ,De-aerating heaters,Boiler feed water heaters and other heat exchangers ,Valves, pumps, shafts, fittings, and fasteners,Industrial heat exchangers
Monel K-500 forged flange that are used in Monoethanolamine (MEA) reboiling tube.Cladding for the upper areas of oil refinery crude columns
Monel K-500 forged flange that are used in processing units,mechanical equipment, crystalizer equipment
Monel K-500 is a precipitation-hardenable nickel-copper alloy, we kown how to forging it sucessfully.
Monel K-500 forged parts can be in the solution treated and heat treated as per the requirement of the clients
The production standard of Monel K-500 forged Flange that we could do is as follows:
ANSI B16.5, ANSI B16.47,EN 1092-1, BS 4504, JIS B2220,GOST 12820-80, GOST 12821-80, GOST 12815-80,South African SABS 1123 / SANS 1123
Our Monel K-500 forged flanges could be 100% Ultrasonic Inspection as per the forging parts UT Test standard of ASTM A 388 or EN10228.
We produce Monel K-500 forging stainless steel flanges as per the standard of ASTM B564
We could supply Monel K-500 forging material certificate as per the standard of EN10204-3.1 or EN10204-3.2 of third party

We can offer the third party inspection of monel K-500 forging flanges, like ABS, SBS,BV,GL, CCS,etc.

We could supply material inspection report as per the requirement of clients ,suh as Chemical Composition Report, Mechanical Properties Report, UT Report, Heat Treatment Report, Dimensions Check Report

Except to produce Monel K-500 forged flanges, we could also produce alloy K-500 forging flanges,UNS NO5500 Forged flange,2.4375 forged flanges, and other similar grade of forging flanges
We could also do other nickel alloy forged flanges, such as 2.4819.2.4631,2.4851,2.4606,1.4876,1.4959,1.4980,2.4983,2.4656
Any inquiry of Monel K-500 forged flanges, please feel free to contact us. We are glad to quote the best price for every clients