Monel R-405 Forged Flanges

Jiangyin Jiangnan is one leading producer of Monel R-405 forged flanges from china.
Following is the type of Monel R-405 forged flange that we could do
Monel R-405 forged Blind Flanges,Monel R-405 forged Lap Joint Flanges,Monel R-405 forged Slip-on Flanges,Monel R-405 forged Orifice Flanges,Monel R-405 forged Weld Neck Flanges,Monel R-405 forged Socket Weld Flanges,Monel R-405 forged Anchor Flanges,Monel R-405 forged LWN-flanges, Monel R-405 forged Girth flanges,Monel R-405 forged Swivel flanges
The diameter of Monel R-405 forged flanges that we could do is 1/2” -96”, DN15-DN2000
The pressure of Monel R-405 forged flange that we could do is 150# - 2500# (PN6 – PN40)
The melting method of Monel R-405 ignot is ESR+VIR or VIM+ESR+VAR
As per the size of Monel 400 Forged flanges, the Maximum diameter that we could do is 6000mm, and the maximum length that we could do is 2000mm, The maximum weight that we could do is 30 tons
The chemical compostion of Monel R-405 forged flanges is as follows

	C	Si	Mn	P	S	Ni	Mo	Cu	Ti	Al	Fe
Min					0.025	63		28
Max	0.30	0.50	2.00		0.060			34			balance

 
The mechenical property of Monel R-405 forged flanges is as follows:

Tensile Strength	70-85KSI	483-588MPA
Yield Strength	25-40KSI	173MPA-276MPA
Elongation	Min 50%
Reduction

 
As per forging of Monel R-405 flanges, we have 1 tons,3 tons,6 tons,9 tons forging parts hammer and 4500 tons hydraulic press,and 3 metres and 6 metre seamless rolled rings machine
We could do solution treatment and ageing treatment for Monel R-405 forging flanges as per the clients
We have Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester to inspect monel 400 forged flanges
Monel R-405 forged flanges are resistant to sea water and steam at high temperatures as well as to salt and caustic solutions
We could do rough or final machined of Monel R-405 forged flange as per the drawing of the clients
Monel R-405 forged flanges have wide use in many industries, such as
Monel R-405 forged flanges that are used inplants for uranium refining and isotope separation in the production of nuclear fuel
Monel R-405 forged flange that are used in Chlorinated solvents,Crude oil distillation towers,Feed water and steam generator tubing
Monel R-405 forged flange that are used in  Stripper columns, separators,  columns, hydro treaters, hydro crackers, desalters.
Monel R-405 forged flanges that are used in rine heaters, sea water scrubbers in tanker inert gas systems
Monel R-405 forging flanges that are used in Marine engineering,Chemical and hydrocarbon processing equipment,Gasoline and freshwater tanks ,Crude petroleum stills ,De-aerating heaters,Boiler feed water heaters and other heat exchangers ,Valves, pumps, shafts, fittings, and fasteners,Industrial heat exchangers
Monel R-405 forged flange that are used in  Sulfuric acid and hydrofluoric acid alkylation plants.,Pickling bat heating coils
Monel R-405 forged flanges that are used in power generation and power plants
Monel R-405 forged flanges that are used in oil & gas industry
Monel R-405 forged flange that are used in concrete mills and mixers
Monel R-405 forged flange that are used in processing units,mechanical equipment, crystalizer equipment
Monel R-405 is a nickel-copper alloy with a controlled amount of sulfur added to provide sulfide inclusions that act as chip breakers during machining we kown how to forging it sucessfully.
Monel R-405 forged parts can be in the solution treated and heat treated as per the requirement of the clients
The production standard of Monel R-405 forged Flange that we could do is as follows:
ANSI B16.5, ANSI B16.47,EN 1092-1, BS 4504, JIS B2220,GOST 12820-80, GOST 12821-80, GOST 12815-80,South African SABS 1123 / SANS 1123
Our Monel R-405 forged flanges could be 100% Ultrasonic Inspection as per the forging parts UT Test standard of ASTM A 388 or EN10228.
We produce Monel R-405 forging stainless steel flanges as per the standard of ASTM B564
We could supply Monel R-405 forging material certificate as per the standard of EN10204-3.1 or EN10204-3.2 of third party
Except to produce Monel R-405 forging flange, we could also produce alloy R-405 forging flanges,UNS NO4405 Forged flange,and other similar grade of forging flanges
Any inquiry of Monel R-405 forged flanges, please feel free to contact us. We are glad to quote the best price for every clients