# AMS 5655 Alloy 422 (442S19 / EN61) Stainless Steel Forgings

Manufacturer: Jiangyin Jiangnan Metal Co., Ltd. (Open-Die Forging Factory)
Address: No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China
Tel: +86-189-2135-9659
Email: sales@steelforgepieces.com
Web page: https://steelforgepieces.com/Stainless-Steel/AMS-5655-442S19-EN61.html

AMS 5655 covers Alloy 422 (UNS S42200), a 12% chromium martensitic stainless steel with molybdenum, tungsten and vanadium additions. After hardening and tempering it is used at temperatures up to 649°C (1200°F), where it keeps good strength, creep-rupture life and resistance to scaling. Jiangyin Jiangnan Metal Co., Ltd. forges this grade in Jiangyin, Jiangsu, China, into bars, rings, discs, valve stems and turbine studs to customer drawings.

## Key Facts

| Item | Value |
|---|---|
| Steel type | Martensitic stainless, 12Cr-Mo-W-V |
| Service temperature | Up to 649°C (1200°F) |
| Supply condition | Hardened and tempered, or as ordered |
| Made in | Jiangyin, Jiangsu, China |

## Equivalent Grades

| Standard | Designation |
|---|---|
| SAE AMS | AMS 5655 (bar, wire, forgings, hardened and tempered) |
| UNS | S42200 |
| AISI | 616 / Alloy 422 |
| ASTM | A565 Grade 616 |
| BS | BS 970 442S19 / EN61 |
| Military | MIL-S-861, DOD-F-24669/7 |

## Chemical Composition (wt %)

| Element | Content (%) |
|---|---|
| Carbon, C | 0.20 - 0.25 |
| Chromium, Cr | 11.0 - 13.5 |
| Molybdenum, Mo | 0.75 - 1.25 |
| Tungsten, W | 0.75 - 1.25 |
| Nickel, Ni | 0.50 - 1.00 |
| Vanadium, V | 0.17 - 0.30 |
| Manganese, Mn | 1.00 max |
| Silicon, Si | 0.20 - 0.60 |
| Copper, Cu | 0.50 max |
| Phosphorus, P | 0.040 max |
| Sulfur, S | 0.030 max |
| Iron, Fe | Balance |

Typical limits. The latest revision of AMS 5655 or ASTM A565 applies. Tighter limits can be agreed per order.

## Mechanical Properties (Hardened and Tempered, Typical)

| Property | Metric | Imperial |
|---|---|---|
| Tensile strength | 965 MPa | 140 ksi |
| Yield strength (0.2% offset) | 793 MPa | 115 ksi |
| Elongation | 13% | 13% |
| Reduction of area | 25% | 25% |
| Hardness | 293 - 341 HB | 293 - 341 HB |
| Elastic modulus | 190 - 210 GPa | 27,557 - 30,458 ksi |
| Poisson's ratio | 0.27 - 0.30 | 0.27 - 0.30 |

## Physical Properties

| Property | Metric | Imperial |
|---|---|---|
| Density | 7.75 g/cm³ | 0.28 lb/in³ |
| Thermal expansion | 11.2 x 10⁻⁶ /°C | - |
| Thermal conductivity | 23.9 W/m·K | - |

## Forging and Heat Treatment

| Process | Parameters |
|---|---|
| Forging | Preheat at 650 - 760°C (1200 - 1400°F), forge at 1040 - 1175°C (1900 - 2150°F). Cool slowly, then anneal and temper. |
| Hardening | 1040°C (1900°F), soak, oil quench. Complex shapes can be marquenched at 340°C (650°F). |
| Annealing | 730 - 780°C (1350 - 1430°F) for 4 hours, furnace cool, then air cool. |
| Tempering | Temper only after the part has cooled fully to room temperature. |
| Welding | Preheat required. Stress relieve after welding at 590 - 760°C for 4 hours. |

## AMS 5655 Forged Parts We Make

- Forged bars: round, square, flat and rectangular bars, and blade stock for turbines
- Hollow bars and sleeves: bushings, pipes, tubes, barrels, casings, shells, cylinders, hubs and housings
- Seamless rolled rings to drawing
- Forged blocks, discs and plates
- Valve spindles and stems for gas and steam turbines
- Turbine double-end studs, bolts and high-temperature fasteners

## Applications

Most Alloy 422 goes into steam turbine buckets and blades. It is also used for compressor parts, high-temperature bolting, valves and valve trim, and aircraft parts, and in refinery, chemical and power plant equipment.

## FAQ

**What is AMS 5655?**
AMS 5655 is the SAE aerospace specification for Alloy 422 (UNS S42200) bars, wire and forgings in the hardened and tempered condition. Alloy 422 is a 12% chromium martensitic stainless steel used up to 649°C (1200°F).

**Is 442S19 / EN61 the same as Alloy 422?**
Yes. BS 970 442S19 and EN61 are the British designations for Alloy 422. Other equivalents are UNS S42200, AISI 616 and ASTM A565 Grade 616.

**Can Alloy 422 be welded?**
Yes, but it needs preheating to avoid cracking, then a stress relief at 590 - 760°C for about 4 hours after welding.

**Where can I buy AMS 5655 forgings in China?**
Jiangyin Jiangnan Metal Co., Ltd. is an open-die forging factory in Jiangyin, Jiangsu Province. We make AMS 5655 forged bars, rings, discs, valve stems and turbine studs to drawing. Tel +86-189-2135-9659, email sales@steelforgepieces.com.

## Request a Quote

Send your drawing or sizes, material standard, quantity and heat treatment condition to sales@steelforgepieces.com or call +86-189-2135-9659.

Jiangyin Jiangnan Metal Co., Ltd.
No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China
