# BS 416S21 / SS 2380 / Z11CF13 Stainless Steel Forgings

Supplier: Jiangyin Jiangnan Metal Co., Ltd., Open-Die Forging Factory
Address: No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China
Tel: +86 189 2135 9659
Email: sales@steelforgepieces.com
Web page: https://steelforgepieces.com/Stainless-Steel/BS-416S21-SS-2380-Z11CF13.html
Updated: 2026-10-02

We forge 416S21 (AISI 416, EN 1.4005, X12CrS13) into bars, rings, discs, shafts and valve parts at our factory in Jiangyin, Jiangsu, China.

## 416S21 Specification

| Item | Details |
|---|---|
| Steel type | Free-machining martensitic stainless steel, 13% Cr with added sulphur |
| Equivalent grades | AISI 416, UNS S41600, EN 1.4005, X12CrS13, BS 416S21, SIS 2380, AFNOR Z11CF13 |
| Properties | Very good machinability, can be hardened by heat treatment, magnetic |
| Limits | Lower corrosion resistance and weldability than 410 / 1.4006 |
| Forged shapes | Bars, hollow bars, sleeves, rolled rings, discs, blocks, shafts, valve parts |
| Supplier | Jiangyin Jiangnan Metal Co., Ltd., Jiangyin, Jiangsu, China |

## About BS 416S21 Stainless Steel

BS 416S21 is a martensitic stainless steel from British Standard BS 970. The same steel is called AISI 416 in the USA, 1.4005 (X12CrS13) in Europe, SS 2380 in Sweden and Z11CF13 in France.

It is a 13% chromium steel with 0.15 to 0.35% sulphur. The sulphur makes the steel much easier to machine, so it is used for parts made on automatic lathes and CNC machines. The downside is lower corrosion resistance and a rougher surface finish than 1.4006.

Stainless grades have been withdrawn from BS 970, except for forged bars, and are now covered by BS EN 10088-3. For new orders we usually supply to EN 1.4005 or to the customer's own specification.

## Equivalent Grades

| EN 10088-3 | AISI | UNS | BS 970 | JIS | AFNOR | SIS |
|---|---|---|---|---|---|---|
| 1.4005 / X12CrS13 | 416 | S41600 | 416S21 | SUS416 | Z11CF13 | 2380 |

## Chemical Composition (%)

| Grade | C | Si | Mn | P | S | Cr | Ni | Mo |
|---|---|---|---|---|---|---|---|---|
| BS 970 416S21 | 0.09-0.15 | ≤1.00 | ≤1.50 | ≤0.060 | 0.15-0.35 | 11.5-13.5 | ≤1.00 | ≤0.60 |
| EN 1.4005 | 0.08-0.15 | | | | 0.15-0.35 | 12.0-14.0 | | ≤0.60 |

Ni and Mo are optional. Please confirm the governing standard on your order.

## Mechanical Properties

### Typical properties at room temperature

| Property | Annealed | Hardened and Tempered (Condition P) |
|---|---|---|
| Tensile strength, MPa | 530 | 650 |
| 0.2% proof strength, MPa | 290 | 490 |
| Elongation in 50 mm, % | 27 | 24 |
| Impact Izod, J | 75 | 95 |
| Hardness, HB | 160 | 190 |

### Requirements, Condition P

| Property | Value |
|---|---|
| Tensile strength, MPa | 550-700 |
| 0.2% proof strength, MPa | ≥340 |
| Elongation on 5.65√S0, % | ≥15 |
| Impact Izod, J | ≥34 |
| Hardness, HB | 152-207 |

### EN 1.4005 values

| Condition | Rp0.2, MPa | Rm, MPa | A5, % | HB |
|---|---|---|---|---|
| Annealed (+A) | | ≤730 | | ≤220 |
| QT650, min. | ≥450 | 650-850 | ≥12 | |
| QT650, typical | 480 | 710 | 14 | |

For sections of 160 mm and over, properties are agreed at the time of order.

## Physical Properties

| Property | Value |
|---|---|
| Density | 7.70 kg/dm³ |
| Thermal conductivity at 20 °C | 30 W/(m·K) |
| Specific heat at 20 °C | 460 J/(kg·K) |
| Electrical resistivity at 20 °C | 0.60 Ω·mm²/m |
| Thermal expansion 20-100 °C | 10.5 × 10⁻⁶ K⁻¹ |
| Thermal expansion 20-400 °C | 12.0 × 10⁻⁶ K⁻¹ |
| Magnetic | Yes |

## Forging and Heat Treatment

| Process | Temperature | Cooling |
|---|---|---|
| Forging | Preheat slowly to about 800 °C, then heat to 1150-1180 °C. Forge between 1180 and 1000 °C. | Slow cool in furnace or dry ash |
| Annealing | 745-825 °C | Slow furnace cool |
| Hardening | 950-1010 °C | Air or oil |
| Tempering, Condition P | 620-680 °C | As required |
| Tempering, QT650 | 680-780 °C | As required |

Do not use or process this steel between 425 and 525 °C because of 475 °C embrittlement. Welding is not recommended, except for friction welding. If welding is needed, use 1.4833 filler and temper at 650 °C after welding.

## 416S21 Forgings We Make

| Product | Details |
|---|---|
| Forged bars | Round, square, rectangular, flat and hex bars |
| Hollow bars and sleeves | Bushes, tubes, barrels, casings, shells, cylinders, hubs, housings |
| Rings | Forged rings and rolled rings |
| Discs and blocks | Forged discs, blocks and plates |
| Shafts | Pump shafts, motor shafts, step shafts |
| Valve parts | Valve stems, bodies, bonnets, seats and seat rings |
| Fasteners and gears | Bolts, nuts, studs, gear blanks |
| Custom forgings | Made to drawing, rough or finish machined |

## Applications

416S21 is chosen for machined parts that need medium strength and some corrosion resistance. Common parts are pump shafts, motor shafts, valve stems and trim, bolts, nuts, studs and gears. Main users are machinery builders, automotive, petrochemical and electrical equipment makers.

For more corrosive service, 1.4104 or an austenitic grade is a better choice. Send us your working conditions and we will suggest a grade.

## FAQ

**What is BS 416S21 equivalent to?**
AISI 416 (UNS S41600), EN 1.4005 (X12CrS13), SIS 2380 and AFNOR Z11CF13.

**Is 416S21 magnetic?**
Yes. It is a martensitic stainless steel and is magnetic.

**What is the difference between 416S21 and 410S21?**
416S21 has 0.15-0.35% sulphur added, so it machines much better. 410S21 has better corrosion resistance and is easier to weld.

**Can 416S21 be welded?**
Welding is not recommended because of the high sulphur content. Friction welding is the exception.

**Where can I buy 416S21 forgings in China?**
Jiangyin Jiangnan Metal Co., Ltd. in Jiangyin, Jiangsu makes 416S21 / 1.4005 forged bars, rings, discs, shafts and valve parts. Email sales@steelforgepieces.com or call +86 189 2135 9659.

## About Jiangyin Jiangnan Metal

Jiangyin Jiangnan Metal Co., Ltd. is an open-die forging factory at No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China. We make forged bars, hollow bars, rolled rings, discs, shafts and valve parts in carbon steel, alloy steel, tool steel, stainless steel and nickel alloys.

Data is for reference only. Actual values for each order are shown on the mill test certificate.
