Jiangyin Jiangnan Metal Co., Ltd. | Open-Die Forging Factory Tel: +86-189-2135-9659  |  Email: sales@steelforgepieces.com

Incoloy 803 (UNS S35045) Forgings - Rings, Flanges, Bars and Shafts

We forge Incoloy 803 rings, rolled rings, flanges, bars, discs, shafts and tube sheets to your drawing. Material is supplied to ASTM A182 and every piece is UT tested and shipped with an EN 10204 3.1 or 3.2 certificate.

UNS S35045ASTM A182EAF + VOD + ESRUT to ASTM A388 / EN 10228-3EN 10204 3.1 / 3.2
Send an Inquiry

About Incoloy 803

Incoloy 803 (UNS S35045, also called Alloy 803) is an iron-nickel-chromium alloy with 32-37% nickel and 25-29% chromium, which is more nickel and chromium than most other Incoloy grades. It holds up well against oxidation, sulfidation and carburization at high temperature, and it has good stress-rupture strength.

Most Incoloy 803 goes into petrochemical, chemical and thermal processing plants. Ethylene furnace piping is one of its best-known uses. It is often picked as a lower-cost replacement for other alloys in oxidizing, reducing and sulfidizing service.

Incoloy 803 Forgings We Make

All parts are made to the customer's drawing. We can deliver them as forged, rough machined or finish machined.

Forged Rings and Rolled Rings

For furnace, reactor and heat exchanger parts.

Forged Flanges

Weld neck, blind, slip-on and special flanges.

Round Bars and Shafts

Solid bars, stepped shafts and spindles.

Discs and Tube Sheets

For shell and tube heat exchangers.

Sleeves, Bushings and Hollow Bars

Hollow forgings and forged pipe sections.

Custom Open-Die Forgings

Blocks, nozzles, manifolds and other shapes made to drawing.

Chemical Composition of Incoloy 803 (%)

ElementContent (wt %)
Nickel (Ni)32.0 - 37.0
Chromium (Cr)25.0 - 29.0
Iron (Fe)Balance
Carbon (C)0.06 - 0.10
Aluminum (Al)0.15 - 0.60
Titanium (Ti)0.15 - 0.60
Manganese (Mn)1.50 max.
Silicon (Si)1.00 max.
Copper (Cu)0.75 max.
Sulfur (S)0.015 max.

Mechanical and Physical Properties

Mechanical Properties (solution annealed, room temperature)

PropertyMetricImperial
Tensile strength (sheet, cold rolled and solution annealed)552 - 621 MPa80.1 - 90.1 ksi
Yield strength (rod, hot finished and solution annealed)207 - 255 MPa30 - 37 ksi
Elongation at break (sheet, cold rolled and solution annealed)40 - 45 %40 - 45 %

These are typical values. Actual results depend on section size and are reported on the mill test certificate for each order.

Physical Properties

PropertyMetricImperial
Density7.86 g/cm³0.285 lb/in³
Melting range1365 - 1400 °C2490 - 2555 °F
Specific heat479 J/kg·°C0.114 Btu/lb·°F
Permeability at 200 oersted1.001

Standards by Product Form

Product FormStandard
ForgingsASTM A182
Plate, sheet and stripASTM A240, A480
Seamless pipe and tubeASTM A213
Welded tubeASTM A249

How We Make and Check the Forgings

  • Melting: EAF + VOD + ESR.
  • Forging: Open-die forging and ring rolling, close to final shape.
  • Heat treatment: Solution annealing, with furnace records kept for each heat.
  • Machining: Rough or finish machining to the drawing.
  • Ultrasonic testing: To ASTM A388, EN 10228-3 or SEP 1921, whichever the order calls for.
  • Certificates: EN 10204 3.1 as standard, or EN 10204 3.2 with third-party inspection on request.

Where Incoloy 803 Forgings Are Used

  • Ethylene furnaces: Flanges, rings and fittings for furnace piping.
  • Petrochemical and chemical plants: Parts exposed to oxidizing, carburizing or sulfidizing gas at high temperature.
  • Thermal processing: Furnace hardware and parts that go through repeated heating and cooling.
  • Heat exchangers and pressure equipment: Tube sheets, nozzles and flanges for hot service.

FAQ

What is Incoloy 803?

Incoloy 803 (UNS S35045) is an iron-nickel-chromium alloy with 32-37% nickel and 25-29% chromium. It holds up well against oxidation, sulfidation and carburization at high temperature and has good stress-rupture strength. Typical uses are petrochemical, chemical and thermal processing equipment, including ethylene furnace piping.

Which standard covers Incoloy 803 forgings?

Forgings are covered by ASTM A182. Plate, sheet and strip fall under ASTM A240 and A480, seamless tube under ASTM A213 and welded tube under ASTM A249.

Where can I buy Incoloy 803 forged rings and flanges in China?

Jiangyin Jiangnan Metal Co., Ltd. is an open-die forging factory in Zhouzhuang Town, Jiangyin City, Jiangsu Province. We make Incoloy 803 forged rings, rolled rings, flanges, bars, discs, shafts, sleeves and tube sheets to drawing. Call +86-189-2135-9659 or email sales@steelforgepieces.com.

What testing and certificates come with the forgings?

Each forging is UT tested to ASTM A388, EN 10228-3 or SEP 1921 and ships with an EN 10204 3.1 certificate. EN 10204 3.2 with third-party inspection is available on request.

What do you need from me for a quotation?

Please send the drawing or dimensions, the quantity, the delivery condition (as forged, rough machined or finish machined), the UT standard and the certificate type you need.

Looking for Incoloy 803 Forgings?

Send us your drawing or sizes and we will quote you a price.

sales@steelforgepieces.com