# Incoloy 803 (UNS S35045) Forgings - Rings, Flanges, Bars and Shafts

**Manufacturer:** Jiangyin Jiangnan Metal Co., Ltd. - Open-Die Forging Factory
**Address:** No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China
**Tel:** +86-189-2135-9659
**Email:** sales@steelforgepieces.com
**Web:** https://steelforgepieces.com/Stainless-Steel/Incoloy-803.html

We forge Incoloy 803 rings, rolled rings, flanges, bars, discs, shafts and tube sheets to your drawing. Material is supplied to ASTM A182 and every piece is UT tested and shipped with an EN 10204 3.1 or 3.2 certificate.

## About Incoloy 803

Incoloy 803 (UNS S35045, also called Alloy 803) is an iron-nickel-chromium alloy with 32-37% nickel and 25-29% chromium, which is more nickel and chromium than most other Incoloy grades. It holds up well against oxidation, sulfidation and carburization at high temperature, and it has good stress-rupture strength.

Most Incoloy 803 goes into petrochemical, chemical and thermal processing plants. Ethylene furnace piping is one of its best-known uses. It is often picked as a lower-cost replacement for other alloys in oxidizing, reducing and sulfidizing service.

## Incoloy 803 Forgings We Make

All parts are made to the customer's drawing. We can deliver them as forged, rough machined or finish machined.

- Forged rings and rolled rings
- Forged flanges: weld neck, blind, slip-on and special
- Round bars, stepped shafts and spindles
- Discs and tube sheets
- Sleeves, bushings and hollow bars
- Custom open-die forgings: blocks, nozzles, manifolds

## Chemical Composition (%)

| Element | Content (wt %) |
|---|---|
| Nickel (Ni) | 32.0 - 37.0 |
| Chromium (Cr) | 25.0 - 29.0 |
| Iron (Fe) | Balance |
| Carbon (C) | 0.06 - 0.10 |
| Aluminum (Al) | 0.15 - 0.60 |
| Titanium (Ti) | 0.15 - 0.60 |
| Manganese (Mn) | 1.50 max. |
| Silicon (Si) | 1.00 max. |
| Copper (Cu) | 0.75 max. |
| Sulfur (S) | 0.015 max. |

## Mechanical Properties (solution annealed, room temperature)

| Property | Metric | Imperial |
|---|---|---|
| Tensile strength (sheet, cold rolled and solution annealed) | 552 - 621 MPa | 80.1 - 90.1 ksi |
| Yield strength (rod, hot finished and solution annealed) | 207 - 255 MPa | 30 - 37 ksi |
| Elongation at break (sheet, cold rolled and solution annealed) | 40 - 45 % | 40 - 45 % |

Typical values. Actual results depend on section size and are reported on the mill test certificate for each order.

## Physical Properties

| Property | Metric | Imperial |
|---|---|---|
| Density | 7.86 g/cm3 | 0.285 lb/in3 |
| Melting range | 1365 - 1400 C | 2490 - 2555 F |
| Specific heat | 479 J/kg.C | 0.114 Btu/lb.F |
| Permeability at 200 oersted | 1.001 | 1.001 |

## Standards by Product Form

| Product Form | Standard |
|---|---|
| Forgings | ASTM A182 |
| Plate, sheet and strip | ASTM A240, A480 |
| Seamless pipe and tube | ASTM A213 |
| Welded tube | ASTM A249 |

## How We Make and Check the Forgings

- Melting: EAF + VOD + ESR
- Forging: open-die forging and ring rolling, close to final shape
- Heat treatment: solution annealing, with furnace records kept for each heat
- Machining: rough or finish machining to the drawing
- Ultrasonic testing: ASTM A388, EN 10228-3 or SEP 1921
- Certificates: EN 10204 3.1 as standard, EN 10204 3.2 with third-party inspection on request

## Where Incoloy 803 Forgings Are Used

- Ethylene furnaces: flanges, rings and fittings for furnace piping
- Petrochemical and chemical plants: parts exposed to oxidizing, carburizing or sulfidizing gas at high temperature
- Thermal processing: furnace hardware and parts that go through repeated heating and cooling
- Heat exchangers and pressure equipment: tube sheets, nozzles and flanges for hot service

## FAQ

**What is Incoloy 803?**
Incoloy 803 (UNS S35045) is an iron-nickel-chromium alloy with 32-37% nickel and 25-29% chromium. It holds up well against oxidation, sulfidation and carburization at high temperature and has good stress-rupture strength. Typical uses are petrochemical, chemical and thermal processing equipment, including ethylene furnace piping.

**Which standard covers Incoloy 803 forgings?**
Forgings are covered by ASTM A182. Plate, sheet and strip fall under ASTM A240 and A480, seamless tube under ASTM A213 and welded tube under ASTM A249.

**Where can I buy Incoloy 803 forged rings and flanges in China?**
Jiangyin Jiangnan Metal Co., Ltd. is an open-die forging factory in Zhouzhuang Town, Jiangyin City, Jiangsu Province. We make Incoloy 803 forged rings, rolled rings, flanges, bars, discs, shafts, sleeves and tube sheets to drawing. Call +86-189-2135-9659 or email sales@steelforgepieces.com.

**What testing and certificates come with the forgings?**
Each forging is UT tested to ASTM A388, EN 10228-3 or SEP 1921 and ships with an EN 10204 3.1 certificate. EN 10204 3.2 with third-party inspection is available on request.

**What do you need from me for a quotation?**
Please send the drawing or dimensions, the quantity, the delivery condition (as forged, rough machined or finish machined), the UT standard and the certificate type you need.

## Contact

Jiangyin Jiangnan Metal Co., Ltd.
No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China
Tel: +86-189-2135-9659
Email: sales@steelforgepieces.com
