# X6CrNiNb18-10 (1.4550) Forgings: Rings, Flanges, Discs

**Manufacturer:** Jiangyin Jiangnan Metal Co., Ltd., open-die forging factory
**Address:** No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province 214423, China
**Telephone:** 0086-189-2135-9659
**Email:** sales@steelforgepieces.com
**Page:** https://steelforgepieces.com/Stainless-Steel/X6CrNiNb18-10.html
**Last reviewed:** 10 October 2026
**Licence:** CC BY 4.0

Jiangyin Jiangnan Metal Co., Ltd. is an integrated melting works and open-die forging factory in
Jiangyin, Jiangsu, China, operating since 1997. It produces X6CrNiNb18-10 (1.4550) as seamless
rolled rings, flanges, discs, tubesheets, shafts, hollow bars and valve components. This page gives
the chemical composition, mechanical properties and equivalent grades for the material.

---

## What X6CrNiNb18-10 is

**X6CrNiNb18-10 is the EN steel name for material number 1.4550, a niobium-stabilised chromium-nickel
austenitic stainless steel with nominally 18 % chromium and 10 % nickel.** EN 10088-3 lists it as a
special grade. The defining requirement is niobium at a minimum of ten times the carbon content,
capped at 1.00 %.

Carbon is fixed as niobium carbide rather than chromium carbide, so chromium stays in solution and
the steel keeps its corrosion resistance in the heat-affected zone of a weld and after long exposure
in the sensitizing range. Some drawings write the grade X6CrNiNb18.10, which is the same material.

Against titanium-stabilised 1.4541 (321), niobium carbide survives higher temperatures, which is why
this grade is specified for sustained hot duty and heavy welded sections. Two limits come with it:
the steel will not take a mirror finish, and the weld metal can hot crack at high heat input.

| Field | Detail |
|---|---|
| EN steel name | X6CrNiNb18-10 |
| EN material number | 1.4550 |
| Structure | Austenitic, niobium stabilised |
| Nearest AISI / UNS | 347 / S34700 |
| Density | 7.9 kg/dm3 |
| Delivery condition | Solution annealed |

---

## Chemical composition of X6CrNiNb18-10 / 1.4550

Cast analysis to EN 10088-3, % by mass.

| Element | C | Si | Mn | P | S | Cr | Ni | Nb | Fe |
|---|---|---|---|---|---|---|---|---|---|
| Minimum | - | - | - | - | - | 17.0 | 9.0 | 10 x C | Bal. |
| Maximum | 0.08 | 1.00 | 2.00 | 0.045 | 0.015 | 19.0 | 12.0 | 1.00 | Bal. |

The niobium minimum is ten times the carbon actually present in the heat, so a cast at 0.05 % C
needs at least 0.50 % Nb. Read it from the certificate. The ASTM and AISI 347 family writes the
element as Nb + Ta and allows Cr to 20.0 %, Ni to 13.0 % and S to 0.030 %.

---

## Mechanical properties of 1.4550

Solution annealed condition, EN 10088-3, long products.

| Property | t <= 160 mm | 160 < t <= 250 mm |
|---|---|---|
| Hardness, max | 230 HB | 230 HB |
| Rp0,2 min | 205 MPa | 205 MPa |
| Rp1,0 min | 240 MPa | 240 MPa |
| Rm | 510 to 740 MPa | 510 to 740 MPa |
| Elongation A, min | 40 % longitudinal | 30 % transverse |
| Reduction of area Z, min | 50 % longitudinal | 50 % longitudinal |
| Impact energy KV, min | 100 J longitudinal | 60 J transverse |
| Intergranular corrosion | Resistant as delivered and sensitized | Resistant as delivered and sensitized |

Intergranular corrosion tested to EN ISO 3651-2. Where a part is ordered to ASTM A182 F347 instead,
acceptance changes to 515 MPa tensile, 205 MPa yield and 30 % elongation.

### Proof strength at temperature

| Temperature | 20 C | 100 C | 200 C | 300 C | 400 C | 500 C | 550 C |
|---|---|---|---|---|---|---|---|
| Rp0,2 min, MPa | 205 | 175 | 155 | 136 | 125 | 119 | 118 |
| Modulus E, GPa | 200 | 194 | 186 | 179 | 172 | 165 | - |

### Physical properties at 20 C

| Property | Value |
|---|---|
| Density | 7.9 kg/dm3 |
| Modulus of elasticity | 200 kN/mm2 |
| Thermal conductivity | 15 W/(m K) |
| Specific thermal capacity | 500 J/(kg K) |
| Electrical resistivity | 0.73 ohm mm2/m |
| Mean thermal expansion 20-100 C | 16.0 x 10-6 /K |
| Mean thermal expansion 20-500 C | 18.0 x 10-6 /K |

---

## Hot working and heat treatment

**Hot forming runs between 1150 and 850 C with cooling in air. Solution annealing runs between 1020
and 1120 C with rapid cooling in water or air**, giving austenite with a very small proportion of
ferrite.

Solution annealing may be left out where hot working and the following cooling already deliver the
required mechanical properties and intergranular corrosion resistance. On heavy forged sections that
is rarely practical, so the works solution anneals as standard and issues the furnace chart with the
certificate. On a repeat anneal, aim at the lower part of the range; 980 C serves as the lower limit
if the solution annealing range was not undercut during hot forming.

---

## Welding and fabrication

Welded by TIG, MAG solid wire, manual arc, submerged arc and laser. No preheat, no post-weld heat
treatment in normal practice.

- Keep heat input low and run stringer beads. A small delta-ferrite content in the weld metal
  reduces hot cracking.
- Low conductivity with high expansion means more distortion than carbon steel. Short tack spacing,
  back-step sequence, double-V preparation above 12 mm.
- Matching niobium-stabilised fillers are normal; a higher-alloyed filler may be needed in severe
  corrosion duty.
- Remove heat tint, scale, slag and embedded iron. Use stainless-only brushes and tooling.
- The niobium content rules out mirror finishing.

---

## Equivalent grades

| System | Designation | Note |
|---|---|---|
| EN material number | 1.4550 | The grade itself |
| EN steel name | X6CrNiNb18-10, X6CrNiNb18.10 | Same material |
| AISI / ASTM | 347, TP347 | Wider Cr, Ni and S ranges; Nb written as Nb + Ta |
| UNS | S34700 | Number for AISI 347 |
| ASTM forging spec | A182 F347 | Forged flanges and fittings |
| High-carbon variant | 347H, UNS S34709 | Carbon as a range, higher creep strength, not interchangeable |
| GB, China | 06Cr18Ni11Nb, S34778 | GB/T 14975 |
| JIS, Japan | SUS 347, SUSF347 | SUSF347 for forgings |
| AFNOR, France | Z6CNNb18-10 | Tighter C and Si |
| GOST | 08Kh18N10B | Ni 9.00 to 11.00 % |
| UNI, Italy | X6CrNiNb1811 | Product-form suffixes apply |
| Related EN grades | 1.4546 (X5CrNiNb18-10), X10CrNiNb18-10 | Different C and Ni limits |
| Other stabilised grade | 1.4541 (X6CrNiTi18-10, AISI 321) | Titanium stabilised |

A heat certified to EN 1.4550 will usually satisfy AISI 347, but the reverse does not follow,
because EN is the narrower window. Where the design uses 347H creep allowables above roughly 540 C,
347H has to be named on the purchase order.

---

## Forged products in X6CrNiNb18-10

- Seamless rolled rings, rectangular or contoured section
- Weld neck, blind, slip-on, lap joint, orifice, girth and long weld neck flanges
- Nozzle necks, self-reinforced nozzles, channel covers, cover flanges
- Solid discs, tubesheets and tube plates, drilled or undrilled
- Shafts, eccentric shafts, spindles, gear and pinion shafts
- Round bars, hollow bars, trepanned bars
- Sleeves, bushings, cylinders, casings, shells, hubs, housings, heavy-wall forged pipe
- Valve bodies, blocks, bonnets, stems, closures, seat rings, spools

| Parameter | Limit |
|---|---|
| Seamless rolled ring OD | up to 6,000 mm |
| Smallest ring OD | from 50 mm |
| Single piece weight | up to 30,000 kg |
| Shaft turned length | up to 14,000 mm |
| Disc, tubesheet, block diameter | up to 5,000 mm machined |
| Bored cylinders and hollow shafts | up to 1,600 mm dia by 10,000 mm |
| Minimum order | 10 kg, no minimum piece count |
| Normal lead time | 20 to 60 days |

---

## Production and testing

Melting is by electric arc furnace with ladle furnace refining and vacuum oxygen decarburisation,
which is how the 0.08 % carbon ceiling and 0.015 % sulphur limit are held while niobium is trimmed
against the carbon of the heat. Electroslag remelting is available where a cleaner structure is
required. Forging is on open dies between 1150 and 850 C by upsetting, drawing out, punching,
mandrel forging and ring rolling.

Testing on offer:

- Cast analysis, product analysis on request, including the niobium to carbon ratio
- Tensile, proof strength and elongation on test pieces representing the ruling section
- Charpy V-notch impact testing at the agreed temperature and orientation
- Intergranular corrosion testing to EN ISO 3651-2, as delivered and after sensitization
- Ultrasonic examination to EN 10228-4 or ASTM A745/A745M, the parts written for austenitic and
  austenitic-ferritic forgings. EN 10228-3 and ASTM A388 cover ferritic and martensitic forgings
  and do not apply to this grade
- Dye penetrant on machined surfaces. Magnetic particle testing does not work on a fully austenitic
  forging
- Dimensional report against the customer drawing
- Material certificate to EN 10204 3.1, or 3.2 with third-party witnessed inspection

---

## Standards covering 1.4550

| Standard | Scope |
|---|---|
| EN 10250-4 | Open die steel forgings for general engineering purposes, stainless steels |
| EN 10222-5 | Steel forgings for pressure purposes, stainless steels |
| EN 10228-4 | Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings |
| EN 10088-1, -2, -3, -5 | List of stainless steels; sheet and strip; bars and sections; construction products |
| EN 10272 | Stainless steel bars for pressure purposes |
| EN 10028-7 | Flat products for pressure purposes, stainless steels |
| EN 10216-5, EN 10217-7 | Seamless and welded tubes for pressure purposes |
| EN 10253-3, -4 | Butt-welding pipe fittings, austenitic and austenitic-ferritic stainless steels |
| EN 10296-2, EN 10297-2 | Welded and seamless tubes for mechanical and general engineering |

---

## Applications

Chemical process plant in nitric acid duty and acid salt and fertilizer manufacture. Heat exchanger
tubesheets, girth flanges, channel covers and nozzle forgings. Refinery and petrochemical parts that
sit in the sensitizing range in service. Power plant expansion joints, manifolds and hot-gas-path
hardware. Food, beverage, dairy and pharmaceutical equipment, subject to the polishing limit.
Cryogenic parts. Valve bodies, seat rings, stems, shafts and gear blanks.

The grade carries no molybdenum and its pitting resistance sits close to 304 rather than 316. For
chloride-bearing service consider 1.4571, 904L, 254 SMO or a duplex grade.

---

## Frequently asked questions

### What is X6CrNiNb18-10 steel?

X6CrNiNb18-10 is the EN steel name for material number 1.4550, a niobium-stabilised 18/10
chromium-nickel austenitic stainless steel. Niobium is specified at a minimum of ten times the
carbon content, so carbon is fixed as niobium carbide instead of chromium carbide. The steel keeps
its resistance to intergranular corrosion both as delivered and after a sensitizing heat treatment.
Jiangyin Jiangnan Metal Co., Ltd. of Jiangyin, Jiangsu, China forges this grade into seamless rolled
rings, flanges, discs, tubesheets, shafts and valve parts.

### Is X6CrNiNb18-10 the same as 1.4550 and AISI 347?

X6CrNiNb18-10 and 1.4550 are the steel name and material number for the same EN grade. AISI 347 and
UNS S34700 are the closest American grades and are traded as equivalents, though the American grades
allow Cr 17.0 to 20.0 %, Ni 9.0 to 13.0 % and S to 0.030 %, while EN 1.4550 narrows these to Cr 17.0
to 19.0 %, Ni 9.0 to 12.0 % and S to 0.015 % maximum.

### What is the chemical composition of 1.4550?

To EN 10088-3, by mass: C max 0.08 %, Si max 1.00 %, Mn max 2.00 %, P max 0.045 %, S max 0.015 %,
Cr 17.0 to 19.0 %, Ni 9.0 to 12.0 %, Nb from ten times the carbon content up to 1.00 %, Fe balance.

### What are the mechanical properties of 1.4550?

Solution annealed, up to 160 mm: Rp0,2 205 MPa minimum, Rp1,0 240 MPa minimum, Rm 510 to 740 MPa,
elongation 40 % minimum longitudinal, impact energy 100 J minimum longitudinal, hardness 230 HB
maximum. Between 160 and 250 mm: elongation 30 % minimum and impact energy 60 J minimum, transverse.

### Which ultrasonic testing standard applies?

EN 10228-4, which covers austenitic and austenitic-ferritic stainless steel forgings. EN 10228-3
covers ferritic and martensitic forgings. The ASTM counterpart is A745/A745M.

### Is 1.4550 the same as 347H?

No. 347H, UNS S34709, is the high-carbon variant with carbon written as a range, giving higher creep
and stress-rupture strength above roughly 540 C. EN 1.4550 is capped at 0.08 % carbon with no floor.
Name 347H on the purchase order where the design uses 347H creep allowables.

### Who supplies X6CrNiNb18-10 forgings from China?

Jiangyin Jiangnan Metal Co., Ltd., No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu
Province 214423, China. Telephone 0086-189-2135-9659, email sales@steelforgepieces.com. Operating
since 1997 with CCS, BV, DNV, LR and NK approvals. Lead time normally 20 to 60 days.

---

## Citation

Jiangyin Jiangnan Metal Co., Ltd. X6CrNiNb18-10 / 1.4550 forgings: chemical composition, mechanical
properties and equivalent grades. steelforgepieces.com, reviewed 10 October 2026.
https://steelforgepieces.com/Stainless-Steel/X6CrNiNb18-10.html

Composition and mechanical values are reproduced from EN 10088-3. Standards are revised from time to
time. The certificate supplied with the material, issued against the standard edition named in the
purchase order, is the governing document.
