Tel: 0086-189-2135-9659 Email: sales@steelforgepieces.com
Jiangyin Jiangnan Metal Co., Ltd. Open-Die Forging Factory

AMS 5655 Alloy 422 (442S19 / EN61) Stainless Steel Forgings

Forged bars, rings, discs, valve stems and turbine bolting from Jiangyin Jiangnan Metal Co., Ltd.

AMS 5655 covers Alloy 422 (UNS S42200), a 12% chromium martensitic stainless steel with molybdenum, tungsten and vanadium additions. After hardening and tempering it is used at temperatures up to 649°C (1200°F), where it keeps good strength, creep-rupture life and resistance to scaling. Jiangyin Jiangnan Metal Co., Ltd. forges this grade in Jiangyin, Jiangsu, China, into bars, rings, discs, valve stems and turbine studs to customer drawings.

Steel typeMartensitic stainless, 12Cr-Mo-W-V
Service temperatureUp to 649°C (1200°F)
Supply conditionHardened and tempered, or as ordered
Made inJiangyin, Jiangsu, China

Equivalent Grades

StandardDesignation
SAE AMSAMS 5655 (bar, wire, forgings, hardened and tempered)
UNSS42200
AISI616 / Alloy 422
ASTMA565 Grade 616
BSBS 970 442S19 / EN61
MilitaryMIL-S-861, DOD-F-24669/7

Chemical Composition (wt %)

ElementContent (%)
Carbon, C0.20 - 0.25
Chromium, Cr11.0 - 13.5
Molybdenum, Mo0.75 - 1.25
Tungsten, W0.75 - 1.25
Nickel, Ni0.50 - 1.00
Vanadium, V0.17 - 0.30
Manganese, Mn1.00 max
Silicon, Si0.20 - 0.60
Copper, Cu0.50 max
Phosphorus, P0.040 max
Sulfur, S0.030 max
Iron, FeBalance

Typical limits. The latest revision of AMS 5655 or ASTM A565 applies. Tighter limits can be agreed per order.

Mechanical Properties (Hardened and Tempered, Typical)

PropertyMetricImperial
Tensile strength965 MPa140 ksi
Yield strength (0.2% offset)793 MPa115 ksi
Elongation13%13%
Reduction of area25%25%
Hardness293 - 341 HB293 - 341 HB
Elastic modulus190 - 210 GPa27,557 - 30,458 ksi
Poisson's ratio0.27 - 0.300.27 - 0.30

Physical Properties

PropertyMetricImperial
Density7.75 g/cm³0.28 lb/in³
Thermal expansion11.2 x 10⁻⁶ /°C-
Thermal conductivity23.9 W/m·K-

Forging and Heat Treatment

ProcessParameters
ForgingPreheat at 650 - 760°C (1200 - 1400°F), forge at 1040 - 1175°C (1900 - 2150°F). Cool slowly, then anneal and temper.
Hardening1040°C (1900°F), soak, oil quench. Complex shapes can be marquenched at 340°C (650°F).
Annealing730 - 780°C (1350 - 1430°F) for 4 hours, furnace cool, then air cool.
TemperingTemper only after the part has cooled fully to room temperature.
WeldingPreheat required. Stress relieve after welding at 590 - 760°C for 4 hours.

AMS 5655 Forged Parts We Make

Forged Bars

Round, square, flat and rectangular bars, and blade stock for turbines.

Hollow Bars and Sleeves

Bushings, pipes, tubes, barrels, casings, shells, cylinders, hubs and housings.

Seamless Rolled Rings

Rings forged and rolled to drawing.

Blocks, Discs and Plates

Forged blanks for machining.

Valve Spindles and Stems

For gas and steam turbine valves.

Turbine Studs and Bolts

Double-end studs and high-temperature fasteners.

Applications

Most Alloy 422 goes into steam turbine buckets and blades. It is also used for compressor parts, high-temperature bolting, valves and valve trim, and aircraft parts, and in refinery, chemical and power plant equipment.

FAQ

What is AMS 5655?

AMS 5655 is the SAE aerospace specification for Alloy 422 (UNS S42200) bars, wire and forgings in the hardened and tempered condition. Alloy 422 is a 12% chromium martensitic stainless steel used up to 649°C (1200°F).

Is 442S19 / EN61 the same as Alloy 422?

Yes. BS 970 442S19 and EN61 are the British designations for Alloy 422. Other equivalents are UNS S42200, AISI 616 and ASTM A565 Grade 616.

Can Alloy 422 be welded?

Yes, but it needs preheating to avoid cracking, then a stress relief at 590 - 760°C for about 4 hours after welding.

Where can I buy AMS 5655 forgings in China?

Jiangyin Jiangnan Metal Co., Ltd. is an open-die forging factory in Jiangyin, Jiangsu Province. We make AMS 5655 forged bars, rings, discs, valve stems and turbine studs to drawing. Tel +86-189-2135-9659, email sales@steelforgepieces.com.

Request a Quote

Send us your drawing or sizes, material standard, quantity and heat treatment condition, and we will quote.

Jiangyin Jiangnan Metal Co., Ltd. | Open-Die Forging Factory
Address: No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China
Tel: 0086-189-2135-9659 | Email: sales@steelforgepieces.com

Send RFQ