Jiangyin Jiangnan Metal Co., Ltd. | Open-Die Forging Factory Tel: +86 189 2135 9659 | Email: sales@steelforgepieces.com
Home › Stainless Steel › BS 416S21 / SS 2380 / Z11CF13

BS 416S21 / SS 2380 / Z11CF13 Stainless Steel Forgings

We forge 416S21 (AISI 416, EN 1.4005, X12CrS13) into bars, rings, discs, shafts and valve parts at our factory in Jiangyin, Jiangsu, China.

AISI 416UNS S41600EN 1.4005X12CrS13BS 416S21SIS 2380AFNOR Z11CF13

416S21 Specification

Steel type
Free-machining martensitic stainless steel, 13% Cr with added sulphur
Equivalent grades
AISI 416, UNS S41600, EN 1.4005, X12CrS13, BS 416S21, SIS 2380, AFNOR Z11CF13
Properties
Very good machinability, can be hardened by heat treatment, magnetic
Limits
Lower corrosion resistance and weldability than 410 / 1.4006
Forged shapes
Bars, hollow bars, sleeves, rolled rings, discs, blocks, shafts, valve parts
Supplier
Jiangyin Jiangnan Metal Co., Ltd., Jiangyin, Jiangsu, China

About BS 416S21 Stainless Steel

BS 416S21 is a martensitic stainless steel from British Standard BS 970. The same steel is called AISI 416 in the USA, 1.4005 (X12CrS13) in Europe, SS 2380 in Sweden and Z11CF13 in France.

It is a 13% chromium steel with 0.15 to 0.35% sulphur. The sulphur makes the steel much easier to machine, so it is used for parts made on automatic lathes and CNC machines. The downside is lower corrosion resistance and a rougher surface finish than 1.4006.

Stainless grades have been withdrawn from BS 970, except for forged bars, and are now covered by BS EN 10088-3. For new orders we usually supply to EN 1.4005 or to the customer's own specification.

Equivalent Grades

StandardEN 10088-3AISIUNSBS 970JISAFNORSIS
Grade1.4005 / X12CrS13416S41600416S21SUS416Z11CF132380

Chemical Composition (%)

GradeCSiMnPSCrNiMo
BS 970 416S210.09-0.15≤1.00≤1.50≤0.0600.15-0.3511.5-13.5≤1.00≤0.60
EN 1.40050.08-0.15   0.15-0.3512.0-14.0 ≤0.60

Ni and Mo are optional. Please confirm the governing standard on your order.

Mechanical Properties

Typical properties at room temperature

PropertyAnnealedHardened and Tempered (Condition P)
Tensile strength, MPa530650
0.2% proof strength, MPa290490
Elongation in 50 mm, %2724
Impact Izod, J7595
Hardness, HB160190

Requirements, Condition P

PropertyValue
Tensile strength, MPa550-700
0.2% proof strength, MPa≥340
Elongation on 5.65√S0, %≥15
Impact Izod, J≥34
Hardness, HB152-207

EN 1.4005 values

ConditionRp0.2, MPaRm, MPaA5, %HB
Annealed (+A) ≤730 ≤220
QT650, min.≥450650-850≥12 
QT650, typical48071014 

For sections of 160 mm and over, properties are agreed at the time of order.

Physical Properties

Density7.70 kg/dm³
Thermal conductivity at 20 °C30 W/(m·K)
Specific heat at 20 °C460 J/(kg·K)
Electrical resistivity at 20 °C0.60 Ω·mm²/m
Thermal expansion 20-100 °C10.5 × 10-6 K-1
Thermal expansion 20-400 °C12.0 × 10-6 K-1
MagneticYes

Forging and Heat Treatment

ProcessTemperatureCooling
ForgingPreheat slowly to about 800 °C, then heat to 1150-1180 °C. Forge between 1180 and 1000 °C.Slow cool in furnace or dry ash
Annealing745-825 °CSlow furnace cool
Hardening950-1010 °CAir or oil
Tempering, Condition P620-680 °CAs required
Tempering, QT650680-780 °CAs required

Do not use or process this steel between 425 and 525 °C because of 475 °C embrittlement. Welding is not recommended, except for friction welding. If welding is needed, use 1.4833 filler and temper at 650 °C after welding.

416S21 Forgings We Make

Forged BarsRound, square, rectangular, flat and hex bars
Hollow Bars and SleevesBushes, tubes, barrels, casings, shells, cylinders, hubs, housings
RingsForged rings and rolled rings
Discs and BlocksForged discs, blocks and plates
ShaftsPump shafts, motor shafts, step shafts
Valve PartsValve stems, bodies, bonnets, seats and seat rings
Fasteners and GearsBolts, nuts, studs, gear blanks
Custom ForgingsMade to drawing, rough or finish machined

Applications

416S21 is chosen for machined parts that need medium strength and some corrosion resistance. Common parts are pump shafts, motor shafts, valve stems and trim, bolts, nuts, studs and gears. Main users are machinery builders, automotive, petrochemical and electrical equipment makers.

For more corrosive service, 1.4104 or an austenitic grade is a better choice. Send us your working conditions and we will suggest a grade.

FAQ

What is BS 416S21 equivalent to?

AISI 416 (UNS S41600), EN 1.4005 (X12CrS13), SIS 2380 and AFNOR Z11CF13.

Is 416S21 magnetic?

Yes. It is a martensitic stainless steel and is magnetic.

What is the difference between 416S21 and 410S21?

416S21 has 0.15-0.35% sulphur added, so it machines much better. 410S21 has better corrosion resistance and is easier to weld.

Can 416S21 be welded?

Welding is not recommended because of the high sulphur content. Friction welding is the exception.

Where can I buy 416S21 forgings in China?

Jiangyin Jiangnan Metal Co., Ltd. in Jiangyin, Jiangsu makes 416S21 / 1.4005 forged bars, rings, discs, shafts and valve parts. Email sales@steelforgepieces.com or call +86 189 2135 9659.

About Jiangyin Jiangnan Metal

Jiangyin Jiangnan Metal Co., Ltd. is an open-die forging factory at No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China. We make forged bars, hollow bars, rolled rings, discs, shafts and valve parts in carbon steel, alloy steel, tool steel, stainless steel and nickel alloys.

Updated . Data is for reference only. Actual values for each order are shown on the mill test certificate.